1、Methods for Thickening Waterborne Alkyd Resins

Therefore, the waterborne alkyd resin is the key to synthesize waterborne alkyd resin. There are usually two methods: external emulsification and internal emulsification [6,7].

2、Review on Solvents Based Alkyd Resins and Water Borne Alkyd Resins

This review focused on the several modification routes that have been utilized in the synthesis of solvents and water based alkyd resins, the impacts on their coating properties and...

3、Review on Solvents Based Alkyd Resins and Water Borne Alkyd Resins

Unlike solvent based coatings, waterborne coatings are environmentally friendly because the main solvent is water. This means that the utilized binder must be dispersible or emulsified in water.

4、Progress in Synthesis and Modification of Waterborne Alkyd

There are usually two methods: external emulsification and internal emulsification [6,7].

Enhancing the performance and revealing the thermal behavior of the

In this study, total methyl etherified amino resins (TME-amino resins) was used to crosslink waterborne alkyd resins, aiming to achieve a more uniform dispersions of the composite resin emulsions in water, thereby improving the performance of the composite coating in practical applications.

Progress in the preparation of waterborne alkyd

摘要： 针对当前人们环保意识的增强以及对生物基代替化石燃料需求的增加，结合了醇酸树脂生物基含量高、空气氧化交联以及丙烯酸树脂干燥快、硬度高等优点的水性醇酸 -丙烯酸杂化树脂已被广泛研究。 为了给从事水性醇酸 -丙烯酸杂化树脂开发的研究人员提供参考，文章介绍了国内外水性醇酸 -丙烯酸杂化树脂制备方法，主要包括物理共混法、接枝共聚法和局部酯化缩聚法；同时评价了各种水性醇酸 -丙烯酸杂化树脂的制备方法。 最后就发展性价比高的水性醇酸 -丙烯酸杂化树脂制备方法提出了建议，如可重点发展物理共混法制备醇酸二级分散体和丙烯酸一级分散体的杂化共混物以及溶液接枝共聚法制备丙烯酸接枝改性醇酸二级分散体。 关键词: 水性树脂, 醇酸树脂, 丙 …

Enhancing the performance and revealing the thermal behavior

In this study, the curing parameters of the water-based coating were carefully optimized using waterborne alkyd resins as the matrix resin and totally methyl etherified amino resins as the crosslinking agent.

Preparation of excellent

Water-borne alkyd/acrylic hybrid resins with varied maleic anhydride (MA) content were synthesized from the reaction between alkyd intermediate (AK) and maleic anhydride modified acrylic prepolymer (AC) followed by neutralization of carboxyl groups with triethylamine.

Preparation and coating properties of alkyd polyol

Acrylic resins are often used to prepare waterborne alkyd-acrylic hybrid resins due to their characteristics of fast physical drying, yellowing, and chemical resistance.

Low

Water-reducible Alkyd Case Study water-reducible alkyd formulation (Table 3) was based on YPWA-01W70, a Yoo-P int resin from China. The control utilized a combination drier containing cobalt and FIGURE 5—Drawdown Over White Background for High-solids Solventborne Alkyd Formulation

In the production of coatings and adhesives, waterborne alkyd resins are a critical raw material, and optimizing their performance is essential. Thickening technology is a key step that directly impacts the final product’s properties and application range. This article explores how thickening enhances the performance of waterborne alkyd resins, delving into the scientific principles, technical methods, and practical applications involved.

I. Scientific Principles of Thickening Technology

The thickening of waterborne alkyd resins typically involves interactions between high-molecular-weight polymers, particularly hydrogen bonding and van der Waals forces. These forces enable the resin solution to aggregate into denser structures when cooled or heated, thereby increasing viscosity. Thickened resins exhibit improved stability, better resistance to temperature fluctuations, and enhanced mechanical shear tolerance—critical traits for coatings and adhesives.

II. Key Steps in Thickening Technology

1. Pretreatment: Before thickening, the resin undergoes pretreatment, such as pH adjustment and stabilizer addition, to minimize degradation during storage and use.

2. Mixing and Dispersion: Pretreated resin is mixed with thickeners at specific ratios and homogenized through high-speed stirring or ultrasonication to ensure uniform dispersion of resin particles.

3. Heating: The mixture is heated to a target temperature to accelerate particle aggregation, expediting the thickening process.

4. Cooling: Once desired viscosity is achieved, rapid cooling solidifies the thickened resin, preventing unthickened portions from re-dissolving and ensuring product consistency.

III. Practical Applications of Thickening Technology

Thickened waterborne alkyd resins have widespread industrial uses, particularly in coatings. By adjusting thickening ratios and process parameters, precise control over coating viscosity can be achieved to meet diverse application requirements. In adhesives, thickening improves adhesive strength and durability by enhancing resin viscosity.

IV. Challenges and Future Prospects

Despite its benefits, thickening technology faces challenges, such as maintaining long-term stability of thickened resins and addressing compatibility issues between resin types. Future research will focus on developing more eco-friendly and efficient thickening methods while exploring broader resin systems to meet growing market demands.

Thickening waterborne alkyd resins is a pivotal process that enhances product performance and influences industrial efficiency and sustainability. With technological advancements and novel material development, thickening technology is poised to drive transformative innovations in the coatings and adhesives industries.